RS-TV camera 

RS-TV was designed for identification of a foot-borneintruder and vehicle at any time of day or night and transmission of the video image via a radio channel to receiving units area and transmitting video data via radio channel to PTV Portable TV Receivers, or to an Operator’s Console.

How it works:

The camera is attached to any landscape elements using a set of mounting rig. It can be fixed to a tree, a power transmission tower, stones, rocks or natural elevations within the secure area. The rechargeable battery can be placed nearby or buried underground (thus increasing operating life in low temperatures). Antenna of the camera should be placed within line-of-sight of receiver antenna or repeater antenna. All the camera elements are installed in a concealed way.

 Most of the time video camera is in standby mode and is activated by operator or by signals from sensors received via radio-modem. Since the camera is equipped with a radio-modem, it functions within the complex as an independent device that can be controlled individually. It’s possible to set which radio sensors will activate thecamera and for how long it should run when activated.

 After the activation signal is received from inbuilt modem, the camera processor activates the camera and video data channel. The camera uses a 2.4 Ghz one-way channel. The camera starts transmitting video data for a set period of time and then goes into “standby mode”.

* note: Before placing an order, always verify the composition of the device. The manufacturer reserves the right to make changes aimed at improving the operation of the device without  prior notice.